{"title":"Vintage Builds","description":null,"products":[{"product_id":"panhead-upsweep-exhaust-header","title":"Panhead Upsweep Exhaust Header","description":"\u003cp\u003eChrome upsweep drag header set will accept straight fishtail extensions or mufflers. Set is intended for use on kick start engines in rigid frames only.\u003c\/p\u003e\u003cp\u003eSet features S type front pipe for better ground clearance. Comes as a three piece system. Order brackets separately. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *NOTE: When installing upsweep pipes on rigid frames  check tube diameter of rigid rear section. Order p-clamps to fit frame. Must fabricate a strap bracket  flat or offset as required.    *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1948-1957 FL","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12974255112262,"sku":"29-0092","price":439.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/24021486617_3bc395c4ea_k.jpg?v=1566280828"},{"product_id":"shovelhead-upsweep-exhaust-header","title":"Shovelhead Upsweep Exhaust Header","description":"\u003cp\u003ePaughco chrome upsweep drag header set for early Shovelhead rigid frame models. Header has a diameter of 1-3\/4 inch.\u003c\/p\u003e\u003cp\u003eHeader set will accept straight fishtail extensions or mufflers available separately. Order brackets separately. Set features  inchS inch type front pipe for better ground clearance and comes as a three piece system. This set will not fit with an electric start wrap around oil tank and can be used with hydraulic brakes only. *NOTE: When installing upsweep pipes on rigid frames  check tube diameter of the rigid rear section. Order p-clamps to fit frame. Must fabricate a strap bracket  flat or offset as required. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only.\u003c\/p\u003e\n\n**Fits:** 1966-1969 FL","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12974434779206,"sku":"29-0090","price":523.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/36811764341_1b3cd00b3f_o.jpg?v=1566280801"},{"product_id":"knucklehead-upsweep-exhaust-header-set-1941-1947","title":"Knucklehead Upsweep Exhaust Header Set 1941-1947","description":"\u003cp\u003eChrome drag exhaust header set includes front and rear upsweep headers for rigid frames. Front pipe is two piece type. Use with 1-3\/4 inch extensions or mufflers.\u003c\/p\u003e\u003cp\u003e**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *NOTE: This is a 3 piece set. **NOTE: When installing upsweep pipes on rigid frames  check tube diameter of the rigid rear section. Order p-clamps to fit frame. There are T-bolts with various length studs to fit pipe channels. Must fabricate a strap bracket  flat or offset as required. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1941-1947 FL","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12974701609030,"sku":"29-0094","price":523.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/knucklehead_upsweep.jpg?v=1741644441"},{"product_id":"exhaust-drag-pipe-set-side-by-side-style-panhead","title":"Panhead Exhaust Set Side by Side Style","description":"\u003cp\u003eChrome shotgun drag pipes have a side by side style and are for a rigid frame.\u003c\/p\u003e\u003cp\u003e*WARNING: Exhaust reaches high temperatures V-Twin is not liable for injuries. Use correct heat shields or fiberglass wraps. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1948-1965 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":12974787887174,"sku":"30-3205","price":439.93,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/panhead_exhaust_side_by_side.jpg?v=1536043141"},{"product_id":"panhead-exhaust-set-flat-front-pipe","title":"Panhead Exhaust Set Flat Front Pipe","description":"\u003cp\u003eChrome shotgun drag pipes are for a rigid frame. Front pipe is flat and comes in a three piece set.\u003c\/p\u003e\u003cp\u003eOrder bracket separately. *WARNING: Exhause reaches high temperatures V-Twin is not liable for injuries. Use correct heat shields or fiberglass wraps. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1948-1957 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":12974881833030,"sku":"30-3163","price":439.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/Panhead_shotgun_pipe.jpg?v=1536043370"},{"product_id":"shovelhead-exhaust-drag-pipe-set-over-transmission-style","title":"Shovelhead Exhaust Drag Pipe Set Over Transmission Style","description":"\u003cp\u003eChrome Paughco drag pipes are over the transmission rear pipe that will work on kick start models.\u003c\/p\u003e\u003cp\u003e**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1966-1969 FL","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12974945599558,"sku":"30-3178","price":408.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/shovelhead_drag_pipe.jpg?v=1536043528"},{"product_id":"shovelhead-exhaust-drag-pipes","title":"Shovelhead Exhaust Drag Pipes","description":"\u003cp\u003e1-3\/4 inch chrome Paughco drag pipes are 34 inch long and are for mechanical or hydraulic rear brakes.\u003c\/p\u003e\u003cp\u003e**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1966-1969 FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":12975035973702,"sku":"30-3159","price":317.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/shovelhead_drags.jpg?v=1536043754"},{"product_id":"shovelhead-exhaust-drag-pipe-set-slash-cut","title":"Shovelhead Exhaust Drag Pipe Set Slash Cut","description":"\u003cp\u003eChrome shotgun drag pipes are for rigid frames with a 1966-1969 Shovelhead engine with kick start only. The front pipe is an outside the frame type. Features channel mounts.\u003c\/p\u003e\u003cp\u003e*NOTE: The front pipe is 1 piece and the rear pipe is 1 piece. *WARNING: Exhaust reaches high temperatures V-Twin is not liable for injuries. Use correct heat shields or fiberglass wraps. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *NOTE: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12975070707782,"sku":"30-3155","price":404.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/cone_shovel_drags.jpg?v=1536043843"},{"product_id":"knucklehead-exhaust-drag-pipe-set-slash-cut","title":"Knucklehead Exhaust Drag Pipe Set Slash Cut","description":"\u003cp\u003eChrome Paughco drag pipes have a diameter of 1-3\/4 inch and are 34 inch long. Pipes are for 1936-1947 Knuckleheads with a 61 inch or 74 inch engine.\u003c\/p\u003e\u003cp\u003e**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1936-1940 EL | 1941-1947 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":12975104262214,"sku":"30-3120","price":301.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/knucklehead_drag_pipe.jpg?v=1536043945"},{"product_id":"front-brake-backing-plate-kit-left-side-chrome","title":"Front Brake Backing Plate Kit Left Side Chrome","description":"\u003cp\u003eKit includes brake shoes  springs  satin chrome backing plate  chrome drum  axle sleeve  nuts  cam with lever and mount stud for left side brake.\u003c\/p\u003e\u003cp\u003eNOTE: Pivot stud hole is oversize to allow 7\/16 inch stud with locking washer  locking face toward backing plate  to be  inchset inch when adjusting brake shoes.\u003c\/p\u003e\n\n**Fits:** 1949-1966 FL","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12976129409094,"sku":"23-9204","price":397.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/23-9204a.jpg?v=1536046341"},{"product_id":"frame-neck-forging","title":"Knucklehead Frame Neck Forging","description":"\u003cp\u003eFrame neck without hallmarks forged is machined to accept stock diameter tubing and has a 29� rake.\u003c\/p\u003e\n\n**Fits:** 1941-1945 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":13003735072838,"sku":"51-0596","price":497.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/51-0596.jpg?v=1569094486"},{"product_id":"rigid-hardtail-rear-frame-section","title":"Rigid Hardtail Rear Frame Section","description":"\u003cp\u003eRigid hardtail frame raw steel rear section is 1957 style replica construction with components featuring the factory details of the period.\u003c\/p\u003e\u003cp\u003eThe rear transmission mounts are 2 inch from the bottom cross beam to the top of the plate. May be used to repair 1948-1957 FL rigid frames or as a hardtail conversion on 1958-1984 FL frames. This rigid hardtail rear frame section includes: rear engine mount  center post  front transmission mount  transmission cross strap  spools  rear axle plates  fender cross tube  tool box mount  oil tank mount  lower fender mount  footboard tabs  as a welded assembly as pictured. Accepts 4 speed transmission mount plate  1947-1957 mechanical rear brake components  and a 1948-1984 FL or FX front frame\/neck section. The axle slots are 7\/8 inch on both sides. *NOTE: Installer\/fabricator will have to salvage existing top tank tube  or provide a new one. Seat post and a wrap around oil tank can be installed as original. Includes cross shaft bushings installed with cross shaft. Rear axle assembly accepts star hub wheels.\u003c\/p\u003e\n\n**Fits:** 1948-1984 FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":13336432508998,"sku":"51-0823","price":1140.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/51-0823a.jpg?v=1541289469"},{"product_id":"replica-frame-hardtail","title":"Replica Frame Hardtail","description":"\u003cp\u003eReplica rear hardtail frame section is duplicated from an original rigid frame. Weld-on type and does not have seat post bushing.\u003c\/p\u003e\u003cp\u003eThe rear transmission mounts are 1-1\/2 inch tall. This hardtail includes rear transmission mount  tool box bracket  fender cross brace  seat post top yoke  and 2 dowel pins to connect lower frame tubes. Installer must weld lower tube inserts and top seat post yoke assembly in place  which requires alignment and fitting of the components. Top seat post forging is included but not welded in place  fabricator or installer must add tubing and seat post bushing. *NOTE: The seat post bushing must be ordered separately. *NOTE: Transmission height shimming may be required. The axle slots are 7\/8 inch on both sides.    *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1958-1984 FL | 1971-1984 FX","brand":"vtwin","offers":[{"title":"Default Title","offer_id":13336479957062,"sku":"51-0457","price":727.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/51-0457a.jpg?v=1570037242"},{"product_id":"32-inline-spring-fork-chrome-4","title":"22\" Inline Spring Fork Chrome +4\"","description":"\u003cp\u003eUnit features chrome front legs  chrome outer springs  chrome rockers and chrome rear leg.\u003c\/p\u003e\u003cp\u003eIncludes inner and outer springs  front and rear legs  1 inch inline stem and offset outside mount rockers to utilize interchangeable wheel with lug bolt type drum and mechanical front brake drum  studs and bushings  spring rods with bushings. Some assembly may be required. These forks are replicas of the stock units with electric welded and brazed construction and will accept all original style components and accessories for the detailed replica look. Top clamp  neck races  and cone nut are not included.                                            *NOTE: UPS may conside this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.             *NOTE: We measure from the top of the rear leg (tube)  to the front axle center line.\u003c\/p\u003e\n\n**Fits:** 1941-1945 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":14958560510022,"sku":"49-2417","price":1466.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/49-2417.jpg?v=1539110092"},{"product_id":"32-inline-spring-fork-assembly-black-4","title":"22\" Inline Spring Fork Assembly Black +4","description":"\u003cp\u003eUnit features parkerized springs  rockers  front and rear leg in black. This 22 inch assembly is 4 inch over stock length.\u003c\/p\u003e\u003cp\u003eIncludes inner and outer springs  front and rear legs  1 inch inline stem and offset outside mount rockers to utilze interchangeable wheel with lug bolt type drum and mechanical front brake drum  studs and bushings  spring rods with bushings. Some assembly may be required. These forks are replicas of the stock units with electric welded and brazed construction  and will accept all original style components and accessories for a detailed replica look. Top clamp  neck races and cone nut are not included.                                            *NOTE: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual wight  which will result in higher shipping costs.             *NOTE: We measure from the top of the rear leg (tube)  to the front axle center line.\u003c\/p\u003e\n\n**Fits:** 1937-1946 UL | 1941-1946 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":14958666874950,"sku":"49-2420","price":1500.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/49-2420b.jpg?v=1539110186"},{"product_id":"28-inline-spring-fork-assembly","title":"18\" Inline Spring Fork Assembly Chrome","description":"\u003cp\u003eKit includes front and rear chrome legs  chrome outer springs  chrome rockers and zinc plated rocker studs. It comes completely assembled with a 1 inch stem with 1 inch x 24 thread.\u003c\/p\u003e\u003cp\u003eOrder bearing neck kit  axle kit  top tree and handlebars separately. Some assembly may be required. Bottom of neck is larger in diameter to accommodate the Lower Race. Rear fork leg is not tapped.                                     *NOTE: We measure from the top of the rear leg (tube)  to the front axle center line. This complete replica Spring Fork assembly is a product of 14 separate processes: Tubing  Hydraulic Swage Press  Investment Casting  Forging  Flattening Press  Robotic Welding  Brazing  Polish  Chrome  Paint  Spring Winder  Machine Shop  Drill Shop and Packaging.\u003c\/p\u003e\n\n**Fits:** 1936-1940 EL | 1937-1945 UL | 1941-1945 FL","brand":"vtwin","offers":[{"title":"chrome","offer_id":41044638105789,"sku":"49-2909","price":1461.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/49-2909b.jpg?v=1648571673"},{"product_id":"black-28-offset-spring-fork-assembly","title":"Black 18\" Offset Spring Fork Assembly","description":"\u003cp\u003eUnit features front and rear legs with a painted black finish  inner and outer springs  and rockers. For use with rigid frames with 30� rake.\u003c\/p\u003e\u003cp\u003eIncludes offset outside mount rockers to utilize interchangeable wheel with lug bolt type drum  studs and bushings  and spring rods with bushings. Some assembly may be required. These forks are replicas of the stock units with electric welded and brazed construction  and will accept all original style components and accessories for the detailed replica look. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.                                                             *NOTE: We measure from the top of the rear leg (tube)  to the front axle center line.\u003c\/p\u003e\n\n**Fits:** 1946-1948 FL, UL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":14959159771206,"sku":"49-2407","price":1321.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/49-2407_1.jpg?v=1539110652"},{"product_id":"28-offset-spring-fork-assembly-chrome","title":"18\" Offset Spring Fork Assembly Chrome","description":"\u003cp\u003eUnit features chrome front legs  outer springs  rockers and chrome rear leg. For use with rigid frames with 30� rake.\u003c\/p\u003e\u003cp\u003eIncludes inner and outer springs  front and rear legs  offset outside mount rockers to utilize interchangeable wheel with lug bolt type drum  studs and bushings  spring rods with bushings. Some assembly may be required.               These forks are replicas of the stock units with electric welded and brazed construction and will accept all original style components and accessories for the detailed replica look. Unit is unpolished at the rear fork stem cross plate and at the front spring fork rod forging.                                         *NOTE: We measure from the top of the rear leg (tube)  to the front axle center line.\u003c\/p\u003e\n\n**Fits:** 1946-1948 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":14959229403206,"sku":"49-2412","price":1672.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/49-2412.jpg?v=1539110710"},{"product_id":"replica-retro-straight-leg-rigid-30-rake-frame","title":"Replica Retro Rigid 30° Rake Frame For Evo Engine","description":"\u003cp\u003eReplica retro wishbone frame original style is updated to accept flat side tanks. Original forged parts include: neck  side car mounts and rear axle area. For all Big Twin engines with 4  5 or 6 speed transmission.\u003c\/p\u003e\u003cp\u003eIncludes seat post  transmission mount plate for 4-speed transmission  and rear axle. Accepts Panhead  Shovelhead  Evolution and Twin Cam engines but will require a tin inner primary. Accepts 1986-1999 FXST gas tanks and chain final drive. Frame has a +2 inch raised neck and 9-1\/8 inch between the axle plates. Supplied with the frame is the brake cross shaft for mechanical brakes and stock rear axle plate for use of the star hub wheel and mechanical brakes. The frame is taller in the engine compartment to house the Evolution and Twin Cam motors. Can also be used with rigid mount 5 and 6 speed transmissions. Retro V-Twin rigid frame accepts solid mount TC-88 engines  using steel motor mount  available separately. Accepts a 140mm rear tire. Frame may require modification to the motor mount holes for correct alignment and for clearance in the front rocker box area. Suggested to pre-assemble with inner primary  transmission and rear mount adapter on TC-88 type motors.\u003c\/p\u003e","brand":"VTWINMFG","offers":[{"title":"Wishbone","offer_id":41323467473085,"sku":"51-0097","price":2075.82,"currency_code":"USD","in_stock":true},{"title":"Straight Leg","offer_id":41323467505853,"sku":"51-0096","price":1912.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/51-0096a.jpg?v=1639001995"},{"product_id":"replica-wishbone-frame-kit","title":"Replica HM Wishbone Frame Kit","description":"\u003cp\u003eReplica  inchHM inch wishbone frame features full  inchhallmarks inch on forgings. Includes horn mount tabs on wishbone tubes.\u003c\/p\u003e\u003cp\u003eHallmarks forged with the following components axle plates  side car loops  front motor mount  rear motor mount  seat yoke  rear forging engine and wishbone side car. Neck does not have hallmarks  builder may affix with V-twin #51-0068 if desired.\u003c\/p\u003e\n\n**Fits:** 1949-1952 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":41688446894269,"sku":"51-1076","price":2359.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/51-1076a.jpg?v=1697659983"},{"product_id":"replica-straight-leg-rigid-frame","title":"Replica Straight Leg Rigid Frame","description":"\u003cp\u003eReplica straight leg rigid frame is for chain drive models.\u003c\/p\u003e\u003cp\u003eThis frame is an authentic reproduction of the 1954-1957 straight leg frame with a stock 30� neck rake. Forged parts include: neck  front and rear engine mount  side car mounts  top seat yoke  axle  seat post and footboard tabs. Front engine mount spacer will allow installation of a Knucklehead or Flathead engine. Cross shaft may be removed for use with hydraulic or disc brakes. Disc or drum brake tabs are available separately. Seat post bushing  seat post assembly  brake cross  shaft and mechanical brake cross tube bushing may require reaming prior to assembly for proper fit. Thereforeframe will not be accepted for return (RGA). The frame has an indent on the left lower rear frame bar from tooling fixture.  V-Twin MFG supplys a Bill of Sale only referencing the part number. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1954-1957 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":42377141027005,"sku":"51-1956","price":2091.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/51-1956b.jpg?v=1664571277"},{"product_id":"weld-on-wire-guide","title":"Weld-On Cable Guide","description":"Tired of messy wiring and lines running down your frame bike? Clean it up with these weld on wire guides. Made from mild steel so they can be welded to your frames, sissy bars, forks, handlebars, etc. Easy and clean solution for wiring, brake lines, throttle cables, etc. Just wire tie around the wire guide instead of your frame or forks. Sold in 5-Packs","brand":"Hawg Supply","offers":[{"title":"5-Pack","offer_id":46339701342397,"sku":null,"price":9.99,"currency_code":"USD","in_stock":false},{"title":"10-Pack","offer_id":46339701375165,"sku":null,"price":17.99,"currency_code":"USD","in_stock":false},{"title":"25-Pack","offer_id":46339701407933,"sku":null,"price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/DSC07791-Edit.jpg?v=1689920393"},{"product_id":"linkert-to-s-s-manifold-adapter-plate","title":"Linkert to S\u0026S Manifold Adapter Plate","description":"\u003cp\u003eHave you ever wanted to use your Linkert carb on something besides your knucklehead or panhead? Well here's the solution. This adapter plate allows you to bolt your 4-bolt Linkert carb to any S\u0026amp;S Super E manifold. Comes with 5\/16 allen hardware to attach to your Linkert Carb. Threaded 3\/8-16 holes for the manifold side\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMachined from solid 6061 Aluminum. Raw machined finish \u003c\/p\u003e","brand":"Hawg Supply","offers":[{"title":"Default Title","offer_id":42931313344701,"sku":"","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/2211319E-2E7F-449B-AC4A-1EA88CB24AD4.webp?v=1709576810"},{"product_id":"carb-support-bracket-with-fuel-filter","title":"Carb Support Bracket with Fuel Filter","description":"\u003cp data-start=\"76\" data-end=\"222\"\u003eSick of your fuel filter flopping around on the fuel line? Or your carb sagging and causing intake leaks? Fix both issues with one clean solution.\u003c\/p\u003e\n\u003cp data-start=\"224\" data-end=\"615\"\u003eOur new \u003cstrong data-start=\"232\" data-end=\"276\"\u003eCarb Support with Integrated Fuel Filter\u003c\/strong\u003e keeps your carb firmly supported \u003cem data-start=\"310\" data-end=\"315\"\u003eand\u003c\/em\u003e your fuel clean in a single compact unit. It features a \u003cstrong data-start=\"372\" data-end=\"396\"\u003e5\/16-24 threaded end\u003c\/strong\u003e that threads directly onto your existing case bolt for a solid, no-nonsense install. The built-in filter uses a reusable brass element you can pull, clean, and reinstall—no more cheap throwaway filters or sloppy lines.\u003c\/p\u003e\n\u003cp data-start=\"617\" data-end=\"702\"\u003e\u003cstrong data-start=\"617\" data-end=\"629\"\u003eFitment:\u003c\/strong\u003e\u003cbr data-start=\"629\" data-end=\"632\"\u003e• Shovelhead \u0026amp; Ironhead with 2-bolt intake\u003cbr data-start=\"674\" data-end=\"677\"\u003e• Panhead with S\u0026amp;S intake\u003c\/p\u003e","brand":"Hawg Supply","offers":[{"title":"Machined Finish","offer_id":43330762670269,"sku":"","price":84.99,"currency_code":"USD","in_stock":true},{"title":"Anodized Black","offer_id":43330762703037,"sku":"","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/DSC2928.jpg?v=1767657804"},{"product_id":"rotopax-fuel-can-axle-plate-mount","title":"Knuckle\/Panhead Axle Plate Fuel Mount","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e!!THIS WILL ONLY FIT IF YOU HAVE CAST KNUCKLEHEAD\/PANHEAD AXLE PLATES!! Will not work with the Hardtail Choppers axle plates\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDesigned to be used with Rotopax 1 Gallon Fuel Container and mount or any similar mount.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWILL FIT WITH MECHANICAL BRAKE ✅\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eOur new Cast Axle Plate Accessory Mount allows you to easily carry that extra gallon of gas, \u003ca href=\"https:\/\/hawgsupply.com\/products\/oil-bottle-rack-for-axle-plate-mount?variant=45307279737021\"\u003eextra quart of oil\u003c\/a\u003e, tool bag or tool roll, or anything else you can mount or strap to this guy. This is specifically designed to work with cast knucklehead and panhead axle plates that are found on OEM frames and on the replica hardtails for shovelheads. Comes with 2 threaded bungs that slip in the backside of the axle plate making it easy and fast to install or remove. With our improved slotted design you can now bolt or strap any variety of things all while keeping them from hanging off your sissy bar in a secure spot that is tucked out of the way.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMade from 304 Stainless Steel and Tig Welded\u003c\/p\u003e\n\u003cp\u003eMade to use with these products or any other accessories that will fit our mounting slots.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/hawgsupply.com\/products\/oil-bottle-rack-for-axle-plate-mount?variant=45307279737021\"\u003eOil Bottle Rack\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.rotopax.com\/products\/1-gallon-gasoline?srsltid=AfmBOorqH7ox7b2Spg5ngdRYUwBlDrHyaFUBNm8vrtJSh5trpgdpXVw5\"\u003eRotopax Can\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\u0026amp;nbsp;https:\/\/www.rotopax.com\/products\/pack-mount?srsltid=AfmBOoqh8F8F76xJ9h2LORM-8R6fS32uG2bFMV3K7TfqkjQ0YYmau3gz\"\u003eRotopax Mount\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hawg Supply","offers":[{"title":"Default Title","offer_id":44528744202429,"sku":"","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/1.png?v=1755132423"},{"product_id":"leather-mini-handlebar-bag","title":"Leather Mini Handlebar Bag","description":"\u003cp\u003eI was tired of seeing all the big and bulky bags hanging off risers and handlebars. Sometimes I just want something small that doesn't look terrible but can still carry some necessities. So we designed this mini handlebar bag. Made to mount on your risers or handlebar stems. The straps will work on 1\"-1.5\" handlebars\/risers.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003cp\u003eBlack Bag - 7\"x4.5\"x3\"\u003c\/p\u003e\n\u003cp\u003eBrown Bag (old version) - 5.5”x3.75”x3”\u003c\/p\u003e","brand":"Hawg Supply","offers":[{"title":"Black","offer_id":44528754786493,"sku":"","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Brown","offer_id":44528754819261,"sku":"","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/DSC2798.jpg?v=1766432260"},{"product_id":"s-s-stock-bore-shovelhead-engine-crankcase-set","title":"S\u0026S Stock Bore Shovelhead Engine Crankcase Set","description":"\u003cp\u003eCrankcase set comes ready to assemble.\u003c\/p\u003e\u003cp\u003eS\u0026amp;S Crankcase Sets are shipped set-up with Timken left side bearing and race assembly  seal and seal spacer  oil pump drive bushing  needle bearing and pinion race for right side is pressed in and line honed  ready to assemble. Also included are cylinder studs  nickel plated case bolts  crankcase fittings and a timing and magnetic drain plug. Engine case features stock bore and accepts flywheels up to 8-1\/2 inch diameter. Manufacturer's Statement of Origin is supplied.\u003c\/p\u003e\n\n**Fits:** 1970-1984 FL | 1971-1984 FX | 1979-1984 FLT | 1982-1984 FXR","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44582266634429,"sku":"10-0003","price":1620.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-0003a.jpg?v=1772635418"},{"product_id":"shovelhead-80-inch-short-block","title":"Shovelhead 80 inch Short Block","description":"\u003cp\u003eV-Twin short block is shipped fully assembled and a Manufacturer Statement of Origin is supplied.\u003c\/p\u003e\u003cp\u003eUnit features an S\u0026amp;S crankcase  oil pump and breather assembly  stock stroke flywheels  Timken bearings  and stock cam properly installed with a matched pinion and cam gear  with Torrington bearings. Short block is supplied with a chrome nose cone cover and chrome lifter blocks  fitted with standard tappets. Manufacturer's Statement of Origin is supplied.\u003c\/p\u003e\n\n**Fits:** 1973-1984 FL, FX | 1979-1983 FLT | 1982-1984 FXR","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44582279643325,"sku":"10-0006","price":3602.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-0006a.jpg?v=1729489821"},{"product_id":"primo-belt-drive-kit-8mm","title":"Primo Belt Drive Kit 8mm 1955-1964'","description":"\u003cp\u003eKit includes front and rear pulleys  belt  and hardware. Kit can be used with a closed or open primary.\u003c\/p\u003e\u003cp\u003eFor use with kick starter models with a 1-1\/2 inch belt.\u003c\/p\u003e\n\n**Fits:** 1955-1964 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":44584564228285,"sku":"20-0039","price":542.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20-0039a.jpg?v=1729570182"},{"product_id":"power-clutch-kit","title":"Power Clutch Kit","description":"\u003cp\u003eKit includes a clutch hub  friction and steel discs  pressure plate  clutch plates  hardware and instructions.\u003c\/p\u003e\u003cp\u003eConverts old style clutch packs to smooth modern diaphragm spring function. A sturdy double row ball bearing replaces the stock caged bearings  eliminating clutch grab and clutch hub side movement. Requires less hand effort at the handlebar  delivering smooth hand control. For use with belt or chain drive models with wet or dry clutch.\u003c\/p\u003e\n\n**Fits:** 1941-1984 FL | 1971-1984 FX","brand":"vtwin","offers":[{"title":"Default Title","offer_id":44584564261053,"sku":"20-0516","price":637.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20-0516a.jpg?v=1729570182"},{"product_id":"bdl-belt-drive-kit-8mm","title":"BDL Belt Drive Kit 8mm 1970-1983","description":"\u003cp\u003eBDL 8mm x 42mm electric start belt drive includes a polished ball bearing pressure plate and a Kevlar clutch.\u003c\/p\u003e\u003cp\u003eFeatures a shorter length clutch hub that eliminates unnecessary weight past the mainshaft. Kit can be installed without any modifications to the inner primary.\u003c\/p\u003e\n\n**Fits:** 1970-1983 FL, FX","brand":"vtwin","offers":[{"title":"Default Title","offer_id":44584564326589,"sku":"20-0609","price":903.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20-0609a.jpg?v=1729570182"},{"product_id":"bdl-belt-drive-kit-8mm-1","title":"BDL Belt Drive Kit 8mm 1941-1954'","description":"\u003cp\u003eKit includes a 1-1\/2 inch belt  front pulley  and rear pulley.\u003c\/p\u003e\u003cp\u003eFor use on kick starter models with an open or closed primary. Can be used with stock type clutch or BDL competitor clutch.\u003c\/p\u003e\n\n**Fits:** 1936-1940 EL, UL | 1941-1954 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":44584564293821,"sku":"20-0611","price":538.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20-0611a.jpg?v=1729570183"},{"product_id":"bdl-belt-drive-kit-11mm","title":"BDL Belt Drive Kit 11mm 1965-1984'","description":"\u003cp\u003eKit includes a 1-1\/2 inch belt  31 tooth drilled and tapped front pulley and a 47 tooth rear clutch basket  nut  and washer for kick start models.\u003c\/p\u003e\u003cp\u003eFor use on kick start models with an open primary. Can be used with stock type clutch or BDL competitor clutch.\u003c\/p\u003e\n\n**Fits:** 1965-1984 FL | 1971-1984 FX","brand":"vtwin","offers":[{"title":"Default Title","offer_id":44584564424893,"sku":"20-0624","price":581.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20-0624a.jpg?v=1729570183"},{"product_id":"bdl-competitor-clutch-kit","title":"BDL Competitor Clutch Kit","description":"\u003cp\u003eKit features 9 springs and shoulder bolts for simple adjustment  large 40mm double row hub bearing  polished pressure plate  and Kevlar clutch.\u003c\/p\u003e\n\n**Fits:** 1941-1984 FL | 1971-1984 FX","brand":"vtwin","offers":[{"title":"Default Title","offer_id":44584564392125,"sku":"20-0627","price":621.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20-0627.jpg?v=1729570183"},{"product_id":"black-12-volt-generator-with-low-output","title":"Black 12 Volt Generator with Low Output","description":"\u003cp\u003eCycle Electric generator is 12 volt  low output  2-brush style with built in regulator.\u003c\/p\u003e\u003cp\u003eGenerator fits 1936-1969 FLH including Flathead models. On pre-1958 models  case must be drilled to accept 5\/16 inch-24 size mount bolts. Overall length is 7.58 inch from gasket surface to fins. Gear kit must be ordered separately. Order gear kit to complete the installation. Low output generator can be used with mini 12 volt battery.\u003c\/p\u003e","brand":"Cycle Electric","offers":[{"title":"Default Title","offer_id":44584564457661,"sku":"32-0212","price":619.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/32-0212a.jpg?v=1729570183"},{"product_id":"3-8-slotted-tab-mild-steel-250","title":"3\/8 Slotted Tab Mild Steel .250\"","description":"\u003cp\u003e.250\" thick tab with a slotted 3\/8\" hole\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSold in a 4-pack\u003c\/p\u003e","brand":"Hawg Supply","offers":[{"title":"Default Title","offer_id":44609588428989,"sku":"","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20210306-_DSC0679.jpg?v=1730678704"},{"product_id":"3-8-tab-250","title":"3\/8\" Tab .250\" Mild Steel","description":"\u003cp\u003eMild steel tab .250\" thick with a 3\/8\" hole\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSold in a 4-pack\u003c\/p\u003e","brand":"Hawg Supply","offers":[{"title":"Default Title","offer_id":44609589870781,"sku":"","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20210306-_DSC0689.jpg?v=1730678821"},{"product_id":"5-16-slotted-tab-250-mild-steel","title":"5\/16 Slotted Tab .250\" Mild Steel","description":"\u003cp\u003eMild steel tab .250\" thick with a 5\/16\" slotted hole\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSold in a 4-pack\u003c\/p\u003e","brand":"Hawg Supply","offers":[{"title":"Default Title","offer_id":44609592950973,"sku":"","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20210306-_DSC0687.jpg?v=1730678907"},{"product_id":"5-16-tab-250-mild-steel","title":"5\/16\" Tab .250\" Mild Steel","description":"\u003cp\u003eMild steel tab .250\" thick with a 5\/16\" hole\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSold in a 4-pack\u003c\/p\u003e","brand":"Hawg Supply","offers":[{"title":"Default Title","offer_id":44609593147581,"sku":"","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20210306-_DSC0682.jpg?v=1730678997"},{"product_id":"smc-electric-start-oil-tank-4-speed-frame","title":"SMC Electric Start Oil Tank 4-Speed Frame","description":"\u003cp\u003eSwingarm York oil tank features a chrome finish. Oil tank is for use on 4-speed models with a stock swingarm frame.\u003c\/p\u003e\u003cp\u003etncludes screw in filler cap with dipstick. Tank is for use on 1965-1985 models. York oil tank allows fitting of electric start motor kit. Tank does not have provision for 1968-84 clutch cable adjuster. *NOTE: Rear of tank mounts to frame tube. Raise tank as desired. *NOTE: Removeable bracket allows use on 1958-1964 FX and 1965-1984 FL electric start models. *NOTE: Order oil tank mount bracket set  separately to mount to 1958-1984 FL swingarm frames that use electric start. Brackets can be modified to fit rigid frames. Filler cap features a original threaded style  included. *NOTE: Tank shape referred to as  inchHorseshoe inch or wrap around. Will NOT accept 1979-84 rotary top 4 speed transmissions type. SMC our original oil tank maker since 1979! Installer must fabricate mounting brackets for the front and rear of oil tank. Mounts not included  order base plate separately. Rear bracket may need spacers to adjust height. *NOTE: Order 1965-84 mount base plate  1958-64 front oil tank bracket and 1941-57 mount base  as noted or fabricate by builder.\u003c\/p\u003e\n\n**Fits:** 1958-1964 FL | 1971-1985 FX","brand":"V-Twin","offers":[{"title":"Chrome \/ With Mounting Kit","offer_id":45065932734653,"sku":"40-0648","price":320.12,"currency_code":"USD","in_stock":true},{"title":"Chrome \/ Without Mounting Kit","offer_id":46400187990205,"sku":null,"price":332.77,"currency_code":"USD","in_stock":true},{"title":"Black \/ With Mounting Kit","offer_id":45065932767421,"sku":"40-0641","price":276.57,"currency_code":"USD","in_stock":true},{"title":"Black \/ Without Mounting Kit","offer_id":46400188022973,"sku":null,"price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/40-0648a.jpg?v=1747104268"},{"product_id":"replica-74-panhead-cylinder-piston-kit","title":"Replica 74\" Panhead Cylinder Piston Kit","description":"\u003cp\u003eThis 74 inch Panhead cylinder and piston kit is bored and honed to 87.325mm with a stock compression of 8.5:1. Cylinders have original casting marks as on stock cylinders for this year group.\u003c\/p\u003e\u003cp\u003eBoth cylinders are equipped with oil passages drilled through the wall to allow oil to return through the bore to the crank case. Pistons are pre-fit ready to run. Break in slowly first 500 miles.                                                                                                                      *NOTE: All cast iron cylinders have same piston to wall clearance .0025 -.003.  Bore size is 3.4380 inch-3.4385 inch inner diameter.\u003c\/p\u003e\n\n**Fits:** 1948-1952 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":45065933619389,"sku":"11-0885","price":587.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/11-0885a.jpg?v=1747104888"},{"product_id":"74-shovelhead-cylinder-and-piston-kit","title":"74\" Shovelhead Cylinder and Piston Kit","description":"\u003cp\u003e74 inch Shovelhead cylinder and  piston kit  honed and pre fitted with 8.5:1 compression cast pistons and Hasting rings\u003c\/p\u003e\u003cp\u003eThey are ready to run and will require break-in. Please refer to proper shop manual for suggestions on break-in. Sold in pairs. For stock stroke only. For 1966-1978 Shovelheads. order gasket set separately.                                                                                                            *NOTE: All cast iron cylinders have same piston to wall clearance .0025 -.003.  Bore size is 3.4380 inch-3.4385 inch inner diameter.\u003c\/p\u003e\n\n**Fits:** 1966-1978 FL | 1971-1978 FX","brand":"vtwin","offers":[{"title":"Default Title","offer_id":45065934307517,"sku":"11-2603","price":579.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/11-2603a.jpg?v=1747104965"},{"product_id":"panhead-cylinder-head-set-with-valves","title":"Panhead Cylinder Head Set with Valves","description":"\u003cp\u003eCylinder heads are fully assembled with valves  springs and collars.\u003c\/p\u003e\u003cp\u003eV-Twin Motor Shop Ready Panheads with valves feature original contour castings with the added detail of the stock intake and exhaust port areas. Panheads are assembled with cast iron guides  valve stem seals  and nitrated valves  Panhead exhaust and Shovelhead intake valves  in combination with a complete spring and collar set. Panheads feature o-ring type intake. Our panheads use a long reach 1975-UP or Shovelhead style plugs. Heads include Shovelhead intake valves installed for improved breathing  valve seals installed on all 4 valves. For use with stock Panhead exhaust headers. Max lift is .425. *NOTE: must order original style o-ring type intake manifold separately. Sold as a pair.\u003c\/p\u003e\n\n**Fits:** 1955-1962 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":45065937715389,"sku":"10-1957","price":1534.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-1957a.jpg?v=1747105540"},{"product_id":"s-s-oil-pump-shovelhead","title":"S\u0026S Oil Pump Shovelhead","description":"\u003cul class=\"mb-4 mt-2 pl-3\"\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eKits includes oil pump, standard or universal cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve cover screws with O-rings, breather gear, drive gear, shim kit, miscellaneous hose fittings, plugs, screws and gaskets\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eStandard covers feature top and bottom feeds, universal covers have a number of oil feed and return options, allowing maximum flexibility for customized applications\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003ePump features a smoother design and pressure relief towers that are .300\" shorter than the OEM oil pump\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eAccept 3\/8\" rubber oil lines\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"table table-striped mb-4\"\u003e\n\u003ctbody class=\"ng-star-inserted\"\u003e\n\u003ctr class=\"ng-star-inserted\"\u003e\n\u003ctd\u003e1977\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson\u003c\/td\u003e\n\u003ctd\u003eFXS Low Rider\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-star-inserted\"\u003e\n\u003ctd\u003e1977\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson\u003c\/td\u003e\n\u003ctd\u003eFLH Electra Glide\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-star-inserted\"\u003e\n\u003ctd\u003e1974-1977\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson\u003c\/td\u003e\n\u003ctd\u003eFXE Super Glide\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-star-inserted\"\u003e\n\u003ctd\u003e1971-1977\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson\u003c\/td\u003e\n\u003ctd\u003eFX Super Glide\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-star-inserted\"\u003e\n\u003ctd\u003e1970-1972,\u003cspan\u003e \u003c\/span\u003e1974-1977\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson\u003c\/td\u003e\n\u003ctd\u003eElectra Glide FL\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Drag Specialties","offers":[{"title":"Default Title","offer_id":45272454889661,"sku":"0932-0187","price":715.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/download_1.png?v=1753934196"},{"product_id":"s-s-oil-pump-panhead-shovelhead","title":"S\u0026S Oil Pump - Panhead \u0026 Shovelhead","description":"\u003cul class=\"mb-4 mt-2 pl-3\"\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eKit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve cover screws with O-rings, miscellaneous hose fittings, plugs, screws and gaskets\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eStandard covers feature top and bottom feeds, universal covers have a number of oil feed and return options, allowing maximum flexibility for customized applications\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003ePump features a smoother design and pressure relief towers that are .300\" shorter than the OEM oil pump\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eAccepts 3\/8\" rubber oil lines\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eOil pump rebuild kit available separately\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003cli class=\"feature-section-headline title-2 my-1 text-primary ng-star-inserted\"\u003eNotes\u003c\/li\u003e\n\u003cli class=\"feature-note font-weight-light ng-star-inserted\"\u003e'73-80 models may require drilling; use drilling jig PART # DS-197009 (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drag Specialties","offers":[{"title":"Default Title","offer_id":45272467439805,"sku":"DS194063","price":445.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/4F7E81CC-5706-49B7-89CD-91995A11D9E5.jpg?v=1753934328"},{"product_id":"primo-belt-drive-kit-8mm-36-54","title":"Primo Belt Drive Kit 8mm 36-54'","description":"\u003cp\u003eKit can be used with a closed or open primary.\u003c\/p\u003e\u003cp\u003eFor use with kick starter models with a 1\/-1\/2 inch belt.\u003c\/p\u003e\n\n**Fits:** 1936-1940 EL | 1941-1954 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46398215159997,"sku":"20-0044","price":521.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/20-0044a.jpg?v=1770837150"},{"product_id":"flywheel-assembly-with-4-5-8-inch-stroke","title":"Flywheel Assembly with 4-5\/8 inch Stroke","description":"\u003cp\u003eAssembly is for 1973-1984 Big Twin and are machined from heat treated steel forgings. Cover features natural cast finish  as original!\u003c\/p\u003e\u003cp\u003eForgings makes them structurally superior to cast iron designs. The flywheels are assembled with heavy duty rod set  trued and balanced for pistons. Piston set must be ordered separately.\u003c\/p\u003e\n\n**Fits:** 1973-1984 FL, FX | 1979-1983 FLT | 1982-1983 FXR","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46503437238461,"sku":"10-0038","price":1670.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-0038.jpg?v=1773430976"},{"product_id":"s-s-connecting-rod-set-heavy-duty","title":"S\u0026S Connecting Rod Set Heavy Duty","description":"\u003cp\u003eSet is a heavy duty replacement and includes wrist pin bushings  rod races  matched rods  pins  rollers  cages and nuts for stock or stroker models.\u003c\/p\u003e\u003cp\u003eThese are prefitted and do not require honing.\u003c\/p\u003e\n\n**Fits:** 1941-1981 FL | 1971-1981 FX","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":46503437467837,"sku":"10-0260","price":558.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-0260a.jpg?v=1773430976"},{"product_id":"cylinder-head-set-with-chrome-rocker-box","title":"Cylinder Head Set with Chrome Rocker Box","description":"\u003cp\u003eSet is assembled with cast iron guides  valve stem seals  and nitrated valves.\u003c\/p\u003e\u003cp\u003eHeads have a complete valve job for maximum flow  horsepower  and torque. Heads are single plug and are assembled with chrome rocker boxes. Max lift .450. Sold as a pair.\u003c\/p\u003e\n\n**Fits:** 1966-1977 FL | 1971-1977 FX","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46503437631677,"sku":"10-1063","price":1763.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-1063a.jpg?v=1773430977"},{"product_id":"cylinder-head-set-with-chrome-rocker-box-1","title":"Cylinder Head Set with Chrome Rocker Box","description":"\u003cp\u003eSet is assembled with cast iron guides  valve stem seals  and nitrated valves. For use on 74 inch or 80 inch models with Shovelhead barrels.\u003c\/p\u003e\u003cp\u003eHeads have a complete valve job for maximum flow  horsepower  and torque. Heads are single plug and are assembled with chrome rocker boxes. Max lift .450. Sold as a pair.\u003c\/p\u003e\n\n**Fits:** 1978-1984 FL, FX","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46503437795517,"sku":"10-1064","price":1586.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-1064a.jpg?v=1773430978"}],"url":"https:\/\/hawgsupply.com\/collections\/vintage-builds.oembed?page=2","provider":"Hawg Supply","version":"1.0","type":"link"}