{"title":"Vintage \u0026 Chopper Engine \u0026 Top End","description":null,"products":[{"product_id":"panhead-upsweep-exhaust-header","title":"Panhead Upsweep Exhaust Header","description":"\u003cp\u003eChrome upsweep drag header set will accept straight fishtail extensions or mufflers. Set is intended for use on kick start engines in rigid frames only.\u003c\/p\u003e\u003cp\u003eSet features S type front pipe for better ground clearance. Comes as a three piece system. Order brackets separately. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *NOTE: When installing upsweep pipes on rigid frames  check tube diameter of rigid rear section. Order p-clamps to fit frame. Must fabricate a strap bracket  flat or offset as required.    *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1948-1957 FL","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12974255112262,"sku":"29-0092","price":439.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/24021486617_3bc395c4ea_k.jpg?v=1566280828"},{"product_id":"shovelhead-upsweep-exhaust-header","title":"Shovelhead Upsweep Exhaust Header","description":"\u003cp\u003ePaughco chrome upsweep drag header set for early Shovelhead rigid frame models. Header has a diameter of 1-3\/4 inch.\u003c\/p\u003e\u003cp\u003eHeader set will accept straight fishtail extensions or mufflers available separately. Order brackets separately. Set features  inchS inch type front pipe for better ground clearance and comes as a three piece system. This set will not fit with an electric start wrap around oil tank and can be used with hydraulic brakes only. *NOTE: When installing upsweep pipes on rigid frames  check tube diameter of the rigid rear section. Order p-clamps to fit frame. Must fabricate a strap bracket  flat or offset as required. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only.\u003c\/p\u003e\n\n**Fits:** 1966-1969 FL","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12974434779206,"sku":"29-0090","price":523.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/36811764341_1b3cd00b3f_o.jpg?v=1566280801"},{"product_id":"knucklehead-upsweep-exhaust-header-set-1941-1947","title":"Knucklehead Upsweep Exhaust Header Set 1941-1947","description":"\u003cp\u003eChrome drag exhaust header set includes front and rear upsweep headers for rigid frames. Front pipe is two piece type. Use with 1-3\/4 inch extensions or mufflers.\u003c\/p\u003e\u003cp\u003e**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *NOTE: This is a 3 piece set. **NOTE: When installing upsweep pipes on rigid frames  check tube diameter of the rigid rear section. Order p-clamps to fit frame. There are T-bolts with various length studs to fit pipe channels. Must fabricate a strap bracket  flat or offset as required. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1941-1947 FL","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12974701609030,"sku":"29-0094","price":523.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/knucklehead_upsweep.jpg?v=1741644441"},{"product_id":"exhaust-drag-pipe-set-side-by-side-style-panhead","title":"Panhead Exhaust Set Side by Side Style","description":"\u003cp\u003eChrome shotgun drag pipes have a side by side style and are for a rigid frame.\u003c\/p\u003e\u003cp\u003e*WARNING: Exhaust reaches high temperatures V-Twin is not liable for injuries. Use correct heat shields or fiberglass wraps. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1948-1965 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":12974787887174,"sku":"30-3205","price":439.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/panhead_exhaust_side_by_side.jpg?v=1536043141"},{"product_id":"panhead-exhaust-set-flat-front-pipe","title":"Panhead Exhaust Set Flat Front Pipe","description":"\u003cp\u003eChrome shotgun drag pipes are for a rigid frame. Front pipe is flat and comes in a three piece set.\u003c\/p\u003e\u003cp\u003eOrder bracket separately. *WARNING: Exhause reaches high temperatures V-Twin is not liable for injuries. Use correct heat shields or fiberglass wraps. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1948-1957 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":12974881833030,"sku":"30-3163","price":439.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/Panhead_shotgun_pipe.jpg?v=1536043370"},{"product_id":"shovelhead-exhaust-drag-pipe-set-over-transmission-style","title":"Shovelhead Exhaust Drag Pipe Set Over Transmission Style","description":"\u003cp\u003eChrome Paughco drag pipes are over the transmission rear pipe that will work on kick start models.\u003c\/p\u003e\u003cp\u003e**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1966-1969 FL","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12974945599558,"sku":"30-3178","price":408.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/shovelhead_drag_pipe.jpg?v=1536043528"},{"product_id":"shovelhead-exhaust-drag-pipes","title":"Shovelhead Exhaust Drag Pipes","description":"\u003cp\u003e1-3\/4 inch chrome Paughco drag pipes are 34 inch long and are for mechanical or hydraulic rear brakes.\u003c\/p\u003e\u003cp\u003e**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1966-1969 FL","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":12975035973702,"sku":"30-3159","price":317.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/shovelhead_drags.jpg?v=1536043754"},{"product_id":"shovelhead-exhaust-drag-pipe-set-slash-cut","title":"Shovelhead Exhaust Drag Pipe Set Slash Cut","description":"\u003cp\u003eChrome shotgun drag pipes are for rigid frames with a 1966-1969 Shovelhead engine with kick start only. The front pipe is an outside the frame type. Features channel mounts.\u003c\/p\u003e\u003cp\u003e*NOTE: The front pipe is 1 piece and the rear pipe is 1 piece. *WARNING: Exhaust reaches high temperatures V-Twin is not liable for injuries. Use correct heat shields or fiberglass wraps. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *NOTE: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":12975070707782,"sku":"30-3155","price":404.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/cone_shovel_drags.jpg?v=1536043843"},{"product_id":"knucklehead-exhaust-drag-pipe-set-slash-cut","title":"Knucklehead Exhaust Drag Pipe Set Slash Cut","description":"\u003cp\u003eChrome Paughco drag pipes have a diameter of 1-3\/4 inch and are 34 inch long. Pipes are for 1936-1947 Knuckleheads with a 61 inch or 74 inch engine.\u003c\/p\u003e\u003cp\u003e**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. *Note: UPS may consider this part as packaged  inchoversize inch for shipment  as compared to the actual weight  which will result in higher shipping costs.\u003c\/p\u003e\n\n**Fits:** 1936-1940 EL | 1941-1947 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":12975104262214,"sku":"30-3120","price":301.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/knucklehead_drag_pipe.jpg?v=1536043945"},{"product_id":"frame-neck-forging","title":"Knucklehead Frame Neck Forging","description":"\u003cp\u003eFrame neck without hallmarks forged is machined to accept stock diameter tubing and has a 29� rake.\u003c\/p\u003e\n\n**Fits:** 1941-1945 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":13003735072838,"sku":"51-0596","price":497.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/products\/51-0596.jpg?v=1569094486"},{"product_id":"rotopax-fuel-can-axle-plate-mount","title":"Knuckle\/Panhead Axle Plate Fuel Mount","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e!!THIS WILL ONLY FIT IF YOU HAVE CAST KNUCKLEHEAD\/PANHEAD AXLE PLATES!! Will not work with the Hardtail Choppers axle plates\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDesigned to be used with Rotopax 1 Gallon Fuel Container and mount or any similar mount.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWILL FIT WITH MECHANICAL BRAKE ✅\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eOur new Cast Axle Plate Accessory Mount allows you to easily carry that extra gallon of gas, \u003ca href=\"https:\/\/hawgsupply.com\/products\/oil-bottle-rack-for-axle-plate-mount?variant=45307279737021\"\u003eextra quart of oil\u003c\/a\u003e, tool bag or tool roll, or anything else you can mount or strap to this guy. This is specifically designed to work with cast knucklehead and panhead axle plates that are found on OEM frames and on the replica hardtails for shovelheads. Comes with 2 threaded bungs that slip in the backside of the axle plate making it easy and fast to install or remove. With our improved slotted design you can now bolt or strap any variety of things all while keeping them from hanging off your sissy bar in a secure spot that is tucked out of the way.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMade from 304 Stainless Steel and Tig Welded\u003c\/p\u003e\n\u003cp\u003eMade to use with these products or any other accessories that will fit our mounting slots.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/hawgsupply.com\/products\/oil-bottle-rack-for-axle-plate-mount?variant=45307279737021\"\u003eOil Bottle Rack\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.rotopax.com\/products\/1-gallon-gasoline?srsltid=AfmBOorqH7ox7b2Spg5ngdRYUwBlDrHyaFUBNm8vrtJSh5trpgdpXVw5\"\u003eRotopax Can\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\u0026amp;nbsp;https:\/\/www.rotopax.com\/products\/pack-mount?srsltid=AfmBOoqh8F8F76xJ9h2LORM-8R6fS32uG2bFMV3K7TfqkjQ0YYmau3gz\"\u003eRotopax Mount\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hawg Supply","offers":[{"title":"Default Title","offer_id":44528744202429,"sku":"","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/1.png?v=1755132423"},{"product_id":"s-s-stock-bore-shovelhead-engine-crankcase-set","title":"S\u0026S Stock Bore Shovelhead Engine Crankcase Set","description":"\u003cp\u003eCrankcase set comes ready to assemble.\u003c\/p\u003e\u003cp\u003eS\u0026amp;S Crankcase Sets are shipped set-up with Timken left side bearing and race assembly  seal and seal spacer  oil pump drive bushing  needle bearing and pinion race for right side is pressed in and line honed  ready to assemble. Also included are cylinder studs  nickel plated case bolts  crankcase fittings and a timing and magnetic drain plug. Engine case features stock bore and accepts flywheels up to 8-1\/2 inch diameter. Manufacturer's Statement of Origin is supplied.\u003c\/p\u003e\n\n**Fits:** 1970-1984 FL | 1971-1984 FX | 1979-1984 FLT | 1982-1984 FXR","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44582266634429,"sku":"10-0003","price":1620.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-0003a.jpg?v=1772635418"},{"product_id":"shovelhead-80-inch-short-block","title":"Shovelhead 80 inch Short Block","description":"\u003cp\u003eV-Twin short block is shipped fully assembled and a Manufacturer Statement of Origin is supplied.\u003c\/p\u003e\u003cp\u003eUnit features an S\u0026amp;S crankcase  oil pump and breather assembly  stock stroke flywheels  Timken bearings  and stock cam properly installed with a matched pinion and cam gear  with Torrington bearings. Short block is supplied with a chrome nose cone cover and chrome lifter blocks  fitted with standard tappets. Manufacturer's Statement of Origin is supplied.\u003c\/p\u003e\n\n**Fits:** 1973-1984 FL, FX | 1979-1983 FLT | 1982-1984 FXR","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":44582279643325,"sku":"10-0006","price":3602.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-0006a.jpg?v=1729489821"},{"product_id":"replica-74-panhead-cylinder-piston-kit","title":"Replica 74\" Panhead Cylinder Piston Kit","description":"\u003cp\u003eThis 74 inch Panhead cylinder and piston kit is bored and honed to 87.325mm with a stock compression of 8.5:1. Cylinders have original casting marks as on stock cylinders for this year group.\u003c\/p\u003e\u003cp\u003eBoth cylinders are equipped with oil passages drilled through the wall to allow oil to return through the bore to the crank case. Pistons are pre-fit ready to run. Break in slowly first 500 miles.                                                                                                                      *NOTE: All cast iron cylinders have same piston to wall clearance .0025 -.003.  Bore size is 3.4380 inch-3.4385 inch inner diameter.\u003c\/p\u003e\n\n**Fits:** 1948-1952 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":45065933619389,"sku":"11-0885","price":587.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/11-0885a.jpg?v=1747104888"},{"product_id":"74-shovelhead-cylinder-and-piston-kit","title":"74\" Shovelhead Cylinder and Piston Kit","description":"\u003cp\u003e74 inch Shovelhead cylinder and  piston kit  honed and pre fitted with 8.5:1 compression cast pistons and Hasting rings\u003c\/p\u003e\u003cp\u003eThey are ready to run and will require break-in. Please refer to proper shop manual for suggestions on break-in. Sold in pairs. For stock stroke only. For 1966-1978 Shovelheads. order gasket set separately.                                                                                                            *NOTE: All cast iron cylinders have same piston to wall clearance .0025 -.003.  Bore size is 3.4380 inch-3.4385 inch inner diameter.\u003c\/p\u003e\n\n**Fits:** 1966-1978 FL | 1971-1978 FX","brand":"vtwin","offers":[{"title":"Default Title","offer_id":45065934307517,"sku":"11-2603","price":579.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/11-2603a.jpg?v=1747104965"},{"product_id":"panhead-cylinder-head-set-with-valves","title":"Panhead Cylinder Head Set with Valves","description":"\u003cp\u003eCylinder heads are fully assembled with valves  springs and collars.\u003c\/p\u003e\u003cp\u003eV-Twin Motor Shop Ready Panheads with valves feature original contour castings with the added detail of the stock intake and exhaust port areas. Panheads are assembled with cast iron guides  valve stem seals  and nitrated valves  Panhead exhaust and Shovelhead intake valves  in combination with a complete spring and collar set. Panheads feature o-ring type intake. Our panheads use a long reach 1975-UP or Shovelhead style plugs. Heads include Shovelhead intake valves installed for improved breathing  valve seals installed on all 4 valves. For use with stock Panhead exhaust headers. Max lift is .425. *NOTE: must order original style o-ring type intake manifold separately. Sold as a pair.\u003c\/p\u003e\n\n**Fits:** 1955-1962 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":45065937715389,"sku":"10-1957","price":1534.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-1957a.jpg?v=1747105540"},{"product_id":"s-s-oil-pump-shovelhead","title":"S\u0026S Oil Pump Shovelhead","description":"\u003cul class=\"mb-4 mt-2 pl-3\"\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eKits includes oil pump, standard or universal cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve cover screws with O-rings, breather gear, drive gear, shim kit, miscellaneous hose fittings, plugs, screws and gaskets\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eStandard covers feature top and bottom feeds, universal covers have a number of oil feed and return options, allowing maximum flexibility for customized applications\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003ePump features a smoother design and pressure relief towers that are .300\" shorter than the OEM oil pump\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eAccept 3\/8\" rubber oil lines\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"table table-striped mb-4\"\u003e\n\u003ctbody class=\"ng-star-inserted\"\u003e\n\u003ctr class=\"ng-star-inserted\"\u003e\n\u003ctd\u003e1977\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson\u003c\/td\u003e\n\u003ctd\u003eFXS Low Rider\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-star-inserted\"\u003e\n\u003ctd\u003e1977\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson\u003c\/td\u003e\n\u003ctd\u003eFLH Electra Glide\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-star-inserted\"\u003e\n\u003ctd\u003e1974-1977\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson\u003c\/td\u003e\n\u003ctd\u003eFXE Super Glide\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-star-inserted\"\u003e\n\u003ctd\u003e1971-1977\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson\u003c\/td\u003e\n\u003ctd\u003eFX Super Glide\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-star-inserted\"\u003e\n\u003ctd\u003e1970-1972,\u003cspan\u003e \u003c\/span\u003e1974-1977\u003c\/td\u003e\n\u003ctd\u003eHarley-Davidson\u003c\/td\u003e\n\u003ctd\u003eElectra Glide FL\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Drag Specialties","offers":[{"title":"Default Title","offer_id":45272454889661,"sku":"0932-0187","price":715.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/download_1.png?v=1753934196"},{"product_id":"s-s-oil-pump-panhead-shovelhead","title":"S\u0026S Oil Pump - Panhead \u0026 Shovelhead","description":"\u003cul class=\"mb-4 mt-2 pl-3\"\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eKit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve cover screws with O-rings, miscellaneous hose fittings, plugs, screws and gaskets\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eStandard covers feature top and bottom feeds, universal covers have a number of oil feed and return options, allowing maximum flexibility for customized applications\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003ePump features a smoother design and pressure relief towers that are .300\" shorter than the OEM oil pump\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eAccepts 3\/8\" rubber oil lines\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eOil pump rebuild kit available separately\u003c\/li\u003e\n\u003cli class=\"feature-bullet font-weight-light ng-star-inserted\"\u003eMade in the U.S.A.\u003c\/li\u003e\n\u003cli class=\"feature-section-headline title-2 my-1 text-primary ng-star-inserted\"\u003eNotes\u003c\/li\u003e\n\u003cli class=\"feature-note font-weight-light ng-star-inserted\"\u003e'73-80 models may require drilling; use drilling jig PART # DS-197009 (sold separately).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Drag Specialties","offers":[{"title":"Default Title","offer_id":45272467439805,"sku":"DS194063","price":445.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/4F7E81CC-5706-49B7-89CD-91995A11D9E5.jpg?v=1753934328"},{"product_id":"panhead-cylinder-heads-full-assembly","title":"Panhead Cylinder Heads Full Assembly","description":"\u003cp\u003eV-Twin Motor Shop Ready Panheads are assembled and ready to install.\u003c\/p\u003e\u003cp\u003eFeature original contour castings with the added detail of the stock intake and exhaust port areas. Panheads are assembled with cast iron guides  valve stem seals  oilers and nitrated valves (Panhead exhaust\/Shovelhead intake)in combination with a complete spring and collar set. Matched rocker arm assemblies are installed with heat treated studs and nuts which complete the fully assembled and ready to install Panheads. *NOTE: Includes plumber style intake manifold nipples installed  to accept replica intake manifold kits.\u003c\/p\u003e\n\n**Fits:** 1948-1954 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46503437959357,"sku":"10-1065","price":1839.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-1065a.jpg?v=1773430979"},{"product_id":"panhead-cylinder-heads-full-assembly-1","title":"Panhead Cylinder Heads Full Assembly","description":"\u003cp\u003eV-Twin Motor Shop Ready Panheads come fully assembled and ready to install.\u003c\/p\u003e\u003cp\u003eHeads feature original contour castings with the added detail of stock intake valves and exhaust port areas. Panheads are assembled with cast iron guides  valve stem seals  oilers and nitrated valves  (Panhead exhaust\/Shovelhead intake) in combination with a complete spring and collar set. Matched rocker arm assemblies are installed with heat treated studs \u0026amp; nuts. Carburetor and manifold not inclided. Order original o-ring type intake manifold separately. Panhead cylinder heads feature o-ring style intake. For use with stock Panhead cams only. Max lift is .425. *NOTE: Requires to use with 2 inch stud.\u003c\/p\u003e\n\n**Fits:** 1955-1962 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46503438090429,"sku":"10-1066","price":1886.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-1066a.jpg?v=1773430979"},{"product_id":"panhead-cylinder-heads-3-5-8-inch-big-bore","title":"Panhead Cylinder Heads 3-5\/8 inch Big Bore","description":"\u003cp\u003eV-Twin Motor Shop Ready single plug type Panheads are for use with Big Bore shovel head cylinders only. Comes assembled and are ready to install.\u003c\/p\u003e\u003cp\u003eHeads are assembled with cast iron guides  valve stem seals  nitrated valves Shovelhead intake and Panhead exhaust  stock style springs and retainers. Features Shovelhead exhaust pipe flange and intake ports accept. Shovelhead o-ring type manifolds. Matched rocker arm assemblies are installed with heat treated studs  nuts and oilers. Panheads feature external oiler for Big Bore applications with up to a .450 lift cam. Order o-ring type intake manifold separately. These heads also accept 3-5\/8 inch big bore Shovelhead cylinders with 98.6mm cylinder flange. Top oiler holes have a 1\/8 inch National Pipe Thread. 1\/8 inch National Pipe Thread pipe plugs are installed.\u003c\/p\u003e\n\n**Fits:** 1963-1965 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46503437303997,"sku":"10-1086","price":2092.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-1086a.jpg?v=1773430975"},{"product_id":"panhead-cylinder-heads-with-valves","title":"Panhead Cylinder Heads with Valves","description":"\u003cp\u003ePanhead cylinder heads  assembled with valves  guides and springs.\u003c\/p\u003e\u003cp\u003eSet of two. V-Twin Motor Shop Ready Panheads feature original contour castings with the added detail of the stock intake and exhaust port areas. Panheads are assembled with cast iron guides  valve stem seals  and nitrated valves (Panhead exhaust\/Shovelhead intakeand exhaust)valves in combination with a complete spring and collar set. Order rocker arm assemblies and studs separately. Use with Replica head bolt set.Use stock style plumber intake manifold.\u003c\/p\u003e\n\n**Fits:** 1948-1954 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46503437598909,"sku":"10-1175","price":1554.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/10-1175a.jpg?v=1773430977"},{"product_id":"chrome-shovelhead-top-end-kit","title":"Chrome Shovelhead Top End Kit","description":"\u003cp\u003eTop end kit includes pre fitted 74 inch cylinder set with 8.5:1 pistons  heads  chrome rocker boxes  cylinder base nuts  rocker box studs  nuts and top end gasket kit.\u003c\/p\u003e\u003cp\u003eKit includes fully assembled late style heads.\u003c\/p\u003e\n\n**Fits:** 1966-1984 FL | 1971-1984 FX | 1980-1984 FLT | 1982-1984 FXR","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46503437369533,"sku":"11-0861","price":2179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/11-0861a.jpg?v=1773430976"},{"product_id":"panhead-top-end-kit","title":"Panhead Top End Kit","description":"\u003cp\u003ePanhead top end kit includes front and rear plumber style heads completely assembled with valve guides and springs  rocker arm assemblies  stainless Panhead covers and thick alloy d-rings.\u003c\/p\u003e\u003cp\u003eReplica cylinder set is supplied with standard FLH 74 inch pistons fitted with rings to the cylinders. Includes stock plumber style intake manifold and seal kit  to accept 4 bolt linkert carburetors. Essentially heads have components of Shovelhead intake and exhaust valves. For use with stock lift cams. *NOTE: Cylinder set includes original cast markings.\u003c\/p\u003e\n\n**Fits:** 1948-1962 FL","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46503437533373,"sku":"11-5000","price":2669.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/11-5000a.jpg?v=1773430977"},{"product_id":"shovelhead-exhaust-straight-pipe-set-chrome-shotgun","title":"Shovelhead Exhaust Straight Pipe Set Chrome Shotgun","description":"Shovelhead shotgun exhaust straight pipes features a chrome finish and is for installation on rigid frame FX and FL models.\n\n**Fits:** 1966-1984 FL | 1971-1984 FX","brand":"VTWINMFG","offers":[{"title":"Default Title","offer_id":46610421645501,"sku":"30-0521","price":327.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/30-0521a.jpg?v=1775677472"},{"product_id":"1-3-4-rigid-shotgun-shovelhead-header-set","title":"1-3\/4\" Rigid Shotgun Shovelhead Header Set","description":"Chrome rigid shotgun Shovelhead header set is for rigid frames, with a flat pipe to connect to the front header pipe. Sold as a 3 piece set.","brand":"vtwin","offers":[{"title":"Default Title","offer_id":46610421711037,"sku":"30-3164","price":472.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0038\/2015\/9046\/files\/30-3164a.jpg?v=1775677469"}],"url":"https:\/\/hawgsupply.com\/collections\/vintage-chopper-engine.oembed","provider":"Hawg Supply","version":"1.0","type":"link"}